1/2NPT USA TYPE BALL MALE TIP
Part No. E8903
Inc Gst
Price:
$30.35 Inc GST
Save to Wishlist
Universal Male Tip. Dimensions: 1/2 NPT Thread (NOTE: USA Type 1/2in NPT Thread), Std inBALLin type. The standard male tip of the agricultural industry, developed and proved by Pioneer in over 40 years of farm service. Has rugged, reliable ball valve and induction-hardened locking ball groove to prevent brinelling and prolong life. Shielded valve plus valve stop eliminates flow checking when used with connect-under-pressure type female bodies. Tapered hex design makes identification easy after years of use. Male Tip Standardization: 8010 Series male tips meet ASAE #S366, SAE # J1036, and I.S.O. #5675 standard requirements. These engineering societies have established the following specifications for agricultural male tips: Physical Dimensions. Critical dimensions are to be specified : 1) from the nose of the tip to the locking ball groove, 2) from the locking ball groove to the shoulder where the hex begins, 3) diameter of the nose portion, and 4) valve location in both open and closed position. Valve Spring Force. The force required to push the valve to the flush position is not to exceed 10 lbs. Maximum Pressure Drop. The pressure drop at a flow of 16 GPM is not to exceed 25 PSI. Rated Working and Burst Pressure. The rated working pressure must be a minimum of 3000 PSI. The burst pressure must be a minimum of 10,800 PSI. All standards are established around male tips. Female bodies should be designed to accept an industry standard male tip. All Pioneer female bodies having 1/2in body size designed for agricultural use will accept such a standard male tip.
